Due to the censorship of the mods I have removed the entire post. They removed my solution and a reply, I find no use with BBHN because of this.

Sad thing is nothing that was posted violated any of the rules.

Honestly, I am not aware of the reason why the whole post was removed (EDIT:  I should have read your edit more carefully. You removed your main post.  I thought your original post was deleted and you opened a new topic under the same name). However, from looking at my email log, one person said that your problem possibly stemmed from this: https://wiki.openwrt.org/toh/ubiquiti/airmaxm

Your pictures were hard to read on this forum, so I had to download them to figure out what you did (luckly I still had the pictures). What is came down to is that you serial consoled into the router, turned on TFTP via the serial console (details here (ubnt website). Summary: Type "urescue" at serial prompt), grabbed AirOS XM 5.5.11 from the ubnt website, put the router in TFTP mode and TFTP'd the firmware back to the UBNT device. And then after the node fully flashed back to the origional (and older) stock firmware you proceeded to install BBHN onto the node. Does that sound right?

So for archival purposes (should anyone else have the same problem and need to search for it): "I flashed a bullet m2 hp today with 3.1.0 and when I tried to setup the mesh node it kept giving me an error. I telnet into the device and find out there is no available space. Tried to put the m2 in tftp mode and can't even connect to it. Any advice?" -KE5EUA  (Edit:  Since you deleted your original post, let me know if you want this quote removed since you have full ownership of it.)