Broadband-Hamnet™ Forum :: VoIP
Board Index Latest Posts Welcome Guest   [Register]  [Login]
 Subject :noob having problem with asterisk-now and setting up with spira 1001 a.. 2013-08-25- 08:22:20 
w8dcf
Member
Joined: 2013-06-16- 19:14:29
Posts: 7
Location: 
Subject :noob having problem with asterisk-now and setting up with spira 1001 adapter

when i connect everything and try to get the adapter to register i can't get it to do i have too do some port forwarding and do i forward them to the node or specific address

IP Logged
 Subject :Re:noob having problem with asterisk-now and setting up with spira 100.. 2013-08-26- 05:03:02 
SM7I
Member
Joined: 2012-04-30- 14:56:55
Posts: 79
Location: JO65mo
 
Subject :Re:noob having problem with asterisk-now and setting up with spira 1001 adapter

Normally you will have to do portforwarding of sip signalling and rtp ports if you run nat. Not necessary when using l3 routing.
IP Logged
Last Edited On: 2013-08-26- 05:03:56 By SM7I for the Reason
IT infrastructure and security professional
 Subject :Re:noob having problem with asterisk-now and setting up with spira 100.. 2013-08-26- 08:51:36 
KF5JIM
Future Astronaut
Joined: 2013-07-17- 12:13:36
Posts: 250
Location: Nederland
Subject :Re:noob having problem with asterisk-now and setting up with spira 1001 adapter

You might have some of the configuration parameters set incorrectly.
IP Logged
My opinions and views expressed here are solely my own.
 Subject :Re:noob having problem with asterisk-now and setting up with spira 100.. 2013-08-26- 22:25:45 
KI4WPI
Member
Joined: 2012-09-16- 04:20:26
Posts: 19
Location: Tamarac, FL
Subject :Re:noob having problem with asterisk-now and setting up with spira 1001 adapter

These are parameters that worked for me with programming the SPA1001: http://www.voiptuto.com/?q=en/spa1001 , Sipera is the exact same design as the Linksys version. Everything else that in the video made by KI5JIM applies. One other thing, check off the "Gateway Mesh" in basic settings on the router which the Asterisk connected to. I found this was the one thing that seemed to get the SPA1001 to finally register with Asterisk when everything else was rechecked as being what was instructed.. Gary-KI4WPI
IP Logged
Last Edited On: 2013-08-26- 22:26:31 By KI4WPI for the Reason
Gary Michalosky
KI4WPI
Page # 


Powered by ccBoard


SPONSORED AD: