Broadband-Hamnet™ Forum :: General
Welcome Guest   [Register]  [Login]
 Subject :Linksys and Ubiquiti hardware not cooperating.. 2018-01-31- 15:50:56 
Joined: 2018-01-20- 17:08:29
Posts: 6

I now have two nodes set up, one on Linksys hardware (node 1) and one on Ubiquiti hardware (node 2).  Node 1 displays Node 2 status fine.  Node 2 can see Node 1 but is unable to display Node 1 status.  Both are running freshly downloaded firmware 3.1.0.  Plenty of signal strength since both nodes are in same room.  I also installed HamChat on both nodes and have one-way transmission at best.  Anything I should check or try?

Keith - KE4TH

IP Logged
Page # 

Powered by ccBoard